If You Have Sentimental Reasons To Re
If you have strong feelings about your grandfather’s wedding band or the ring that came over from the old country 100 years ago, it’s understandable that you may want that actual gold to used in your design no matter what.
There;is;a way to do this. I work with a refiner who will refine the troublesome alloys out of a small amount of gold. I can then directly use your gold, add more fresh gold and do a single casting that will use your gold. It is not an economical way to go, but it is doable.
Are All Recycling And Metal Recovery The Same
No, they are not. There are now a growing number of businesses that offer to recycle the metals that can be recovered from your cremations.
The post-cremation metals recycling business if rapidly expanding and growing in America.; In the past, this heavy metals such as gold, silver, platinum, etc had to be buried, which was not only harmful to the environment but a waste of a finite resource.;
Not all of these companies care about environmental compliance and may just be in it for the monetary gains.; With all the companies out there be sure to check out their values and ask come questions. You also want to find one that will give you a fair return on the metals and be as eco-friendly as possible.; A few questions to ask them are:;
- Can they show you their Federal EPA manifest and permit?;
- Can you see the facilities?;
- Do you have customer feedback and may you talk to some of them?;;
Is there any other type of cremation that does not involve fire?
Yes, there is and it is much more eco friendly than traditional cremations.; Many believe that the future of cremation is in Alkaline hydrolysis .
This process uses lye and heat to break down the body by dissolving it. It is available in about 18 states and growing every year. You may not have heard about it, as it goes by even more names than above such as resomation, green cremation, or flameless cremation.;
Is Gold Filled Jewelry Worth Refining
Written on August 31, 2010, by Arch Enterprises
I have just obtained hundreds of pieces of 12-14k gold filled jewelry. Do you think its value could be more than the postage to send it to you? Thanks. From Jamie in Springfield, Missouri
I have some scraps of 14k/20 gold filled pins which I usually make earrings with. I thought about tossing them out, but I did some research and read that it might have value to it. Do you know if my 14k/20 gold filled pins have any value to them and will it be worth it to take these to a refinery? From Elle in Lincoln, Wisconsin
I have two pairs of eye glasses that except for the lens are gold-filled. They are old glasses so the frame isnt light. I am sorry I do not have a picture but am glad to post one if you do buy gold filled. Thank you for your time. From Randy in Greensboro, North Carolina
Hi Jamie, Elle and Randy,
The term gold filled refers to a technique used to make items look like they are made from solid gold, but that cost substantially less.In some ways, it is similar to gold plating in that a thin layer of gold is applied to a base metal in order to achieve the gold appearance.Unlike plating, however, gold filled items typically utilize a hollow 10k or 14k gold tube that is filled with another less valuable metal such as brass and are marked with a GF.A similar process known as rolled gold or rolled gold plate employs the same methodology, but utilizes a sheet of thin gold laminated to the base material.
Don’t Miss: How Much Is 24 Karat Gold Per Gram
Finicky Alloys In Gold Cause Trouble When Re
14k gold jewelry is an alloyed mixture made of 58% of pure gold and of 42% other metals. Gold as a pure metal, can be used over and over again.
Its the other metals that are used as hardening alloys that can screw up the batch.
Without scientific testing in a lab, its impossible to know what the alloy metals in your old gold are, much less their quantities.
When those alloys that arent chosen for their ability to be cast repeatedly are asked to combine and be re-cast weird things can happen.
Doing a single piece casting from a bunch of old gold and its mystery alloys, risks discoloration, porosity, and cracking.
Having done single casting earlier in my career, Ive experienced all three bad outcomes.
I’d been advised never to use old gold in casting and I felt like a proper idiot when I did it anyway and created various disasters.
What’s The Takeaway Message Here
This Ring Needs Vacuum Casting to Capture its Details
There are many the steps of casting gold and more than one method.
I could melt and re-use your gold, but it wouldnt be a happy experience for either of us. Lets look at your old gold to figure out the recycle value you have.
Then lets discuss the project youd like to have and make that happen. You do have options.
Recommended Reading: What Does An Ounce Of Gold Look Like
Where To Have It Done
Finding a jeweler who will re-cast your pieces into a new design is a challenge. Most are hesitant to take this on since the results of melting gold are unpredictable. This will definitely be custom work, and it doesn’t hurt to call custom jewelers in your area. There are also a few jewelers online who will try:
- Walker Metalsmiths – This company specializes in lovely Celtic jewelry, and they will melt down old gold to create a new piece. They have experience with the process and claim their casting methods allow them to offer this service. It takes about three weeks to re-cast the gold, and they will give you a credit toward your item based on the current scrap gold buying price.
- – In general, this company prefers not to re-cast old jewelry; however, they will make an exception if you want to use gold from a piece that has sentimental value. They have not had good luck with re-casting in general, but they will work with a refiner to retrieve the gold from your piece and then use the material in a new design. They don’t list prices, but they do note that this represents a substantial additional cost.
- Foxfire Jewelers – This custom jewelry company has its own refiner and will recycle your gold jewelry to give you a credit for a new piece. They don’t absolutely state that the gold from your old jewelry will be in your new item, but they do note that doing this reduces the price of your new design.
Melt Gold With The Furnace
If you want to melt a large amount of gold for your DIY projects, investing in an electric furnace might be a good idea.
Recommended Reading: Should I Buy Gold Now Or Wait 2020
What Type Of Jewellery Can Be Remodelled
Just about any type of solid or gold jewellery can be remodelled. This might include:
- Old jewellery
- Engagement rings and wedding rings from old relationships
- Single earrings that youve kept after losing the other one
Please note that this is far from an exhaustive list, and just about any gold ring, earring, bracelet, necklace, brooch or pendant can be used in the redesign process No matter if your gold is 9ct, 14ct, 18ct or something in between, theres every chance that well be able to transform it into something beautiful.
Melting Down Old Gold To Make New Jewelry
FAQs & TUTORIAL:For a quick understanding of the value of gold: 24 karat or 24K means pure 100% gold. 12K means 12 parts gold out of 24, i.e., 50% gold and 50% other metals . 14K would be 14 parts gold out of 24; 10K would be 10 parts gold out of 24, etc.
Current question & answers:
Q. Would I get more money if I sell my 12 karat 14.1 gram rope necklace as is or would I get more money melting it down and then selling the gold that is left?
A. Hi Jacob. Don’t even think about melting it. Even assuming it has no aesthetic or collector value, such that you are concerned only about intrinsic metal value …
Most jewelers and buyers would probably — based on the look of the piece, the 12K markings, and a quick acid test, believe that in fact it is 12K gold. Once you melt it into a blob, only a friend or a fool would believe it to be solid 12K without an expensive assay that you would have to pay for 🙂
Luck & Regards,
Previous closely related Q&A’s, oldest first:
Q. Hi All, I have a lot of 9k & 18k gold rings and necklaces and I wanted to get them melted down and remodeled into new jewellery, however I have been told that although a jeweler will take my gold it will probably end up in a scrap box and new gold will be used. Is this true?
The reason that most jewelers do not do common vacuum casting is that it is prohibitively expensive, the basic smelting equipment is almost 500 bucks. The stuff for the casting is almost 10,000 USD Hope that explains it.
Recommended Reading: How Much Is One Ounce Of Gold Worth
Ways To Sell Your Old Gold Jewelry
It’s not a bad idea to sell your old gold jewelry or coins to help you ride out the recession. Just don’t expect to get the full market value for an ounce of gold that you hear so much about.
First, you’ll get a portion of the scrap value, not the market value, for your gold. Buyers melt the gold down, so they will not pay anything for the artisanship or style of the jewelry. Second, dealers must pay a smelter, someone who melts the gold, up to 30 percent of the value to refine the precious metal. Then there’s the buyer’s profit.
Also, remember, some gold items are purer — and more valuable than others are. Pure gold is considered 24 karat, or 24k. Think of it as a 24-slice pie each slice a single karat. Therefore, a necklace that has an ounce of 10k gold has less than half the gold of a necklace with an ounce of 24k gold.
Armed with this knowledge, here are five ways you can sell your gold each a compromise between price and convenience:
Mail-away operationsThe scoop: Seductive advertising and the lure of easy money have drawn in thousands of eager sellers. You mail in your gold and they mail you back a check. GoldPaq, GoldKit and Cash4Gold are among the companies offering the service.
The benefits: It’s easy — they send a prepaid envelope, you drop in the gold, and they mail a check with an itemized receipt and a promise to return your gold if you’re not happy with the price.
Can You Use My Old Jewellery To Make Something New
- We do not melt down your metal and use it to make a new piece. Instead, we can offer you;credit for your;old;gold or platinum scrap;and apply it to a new purchase.
- Melting down old;jewellery;to make a new piece makes the metal weaker and quality is always poorer than when you use ‘fresh’ metal
- We can often use gems and diamonds from the old piece to make a new one.
- You can either get a custom piece or set your gem into one our existing styles here.; This is a great service because pretty much every company forces you to buy a diamond or gem from them in order to purchase a ring.
- Find out what we can make for you using our Remake form.
Diamonds and gems in good condition can certainly be used in your new piece. And while it’s technically possible to melt down your old jewellery and use it in a new piece, it’s not advisable. ;Here’s why: when you re-melt gold, like we do when we’re casting, you need to add at least 50% new metal or you get pits in the resulting casting.
With platinum, one should always start with 100% new metal because the results from remelting platinum never yields a quality ring. ;All jewellers take old platinum jewellery and other previously melted platinum to a refiner.
We can also use gems and diamonds from existing pieces to make something new.; We love using heirloom gems because not only are they a more sustainable approach than using newly mined gems, but they also mean your new piece will hold the memories and history of your family.
Don’t Miss: How To Get Golden State Stimulus
Easy Ways To Melt Gold At Home
Melting gold is not particularly difficult. Whether you want to convert your scrap gold into a storable form or transform your jewelry into gold bars for sale or later use, you only need the right equipment and technique to get the job done.
Gold melts at 1940 F, so the process of melting the metal entails applying intense heat to change the chemical and physical composition. You will also need to eliminate impurities and coalesce fine gold particles before melting your metal to ensure the best outcome.
In this article, I will show you how to melt gold at home using four methods. You dont need advanced knowledge in metallurgy to complete this project, but you need to prioritize safety. So, let us get started!
Recycling: Its Hip And Old Gold’s Not Helping You By Taking Up Space
A better alternative to trying to re-cast your old jewelry is to recycle it. I give my clients credit on old gold jewelry that they use toward new projects.
For example, my client Mary was helped in paying for her new ruby and diamond ring by giving me a heavy old broken chain worth $500.00. And my contractor client Billy, totally paid for the repair of his wedding band by trading in his old, out of date, 70s gold bracelet. I actually gave him money when I delivered his wedding band to him. It was cool and made us laugh.
What if that tangled ball of ancient gold chains in the back of your jewelry box would actually pay for a brand new ring? Wouldnt that be nice!
You May Like: Who Makes Gold Peak Tea
Remove Impurities Using Flux
Before melting your gold, you must get rid of the impurities in the metal using flux. ;
- No matter how clean your gold items seem, they contain some traces of impurities that should be eliminated before starting the melting process. A chemical known as flux is used to remove impurities from gold; the fewer the impurities, the easier it will be to melt the metal.
- Flux also coalesces fine gold particles, preventing them from being blown away during the melting process. Never melt fine gold particles using a propane torch without applying fluxthis will result in massive losses as the force from the torch will blow the gold particles into the air, leaving you with little or nothing to smelt.
- There are different types of flux formulas depending on the extent of the gold melting project. For DIY gold melting projects, you can use accessible compounds such as borax and sodium bicarbonate to refine the gold and hold fine gold particles together.
- Purchase borax from the home cleaning aisle in your local grocery store. Heating bicarbonate or baking soda will produce sodium carbonate.
- Mix borax and sodium carbonate in equal portions to form an effective DIY flux. For each ounce of gold you want to melt, add 3 to 4 pinches of flux. You can increase the amount of flux by a pinch or two if the gold is particularly dirty. However, be careful not to apply excessive flux; flux containing borax eats through ceramic crucibles, creating a hole and rendering the crucible useless.
So Accurate Refining Services
So Accurate has a 35-year-old track record in the metal refining industry. Their key selling point is that they can guarantee you maximum recovery of all your metal because we know that refining takes away from the metal.
Once youre the shipment of your old gold is safely in their possession, you will be notified of this. They will then proceed to weigh the gold and assign a lot number which is entered into their database for quick referencing.
So Accurate uses large induction smelters that give the most homogenous mixture possible.
They go the extra mile in proving their integrity by taking and keeping a pin sample of the liquid gold. This liquid gold is then poured into a mold to create a gold bar.
Read Also: How To Buy Gold Pass In Clash Of Clans